All Prices subject to change without notice. To contact us at Bon Aero, call us at (209) 754-5175, fax us at (209) 754-5177 or e-mail us at admin@davebean.com

Plumbing and Fittings

AN Adaptor Fittings - Flare to Flare, Flare to NPT Adaptors, Flare to NPT Adaptors, Reducers and Expanders, NPT Fittings,AN Flare Port Reducers / Expanders, AN 920 and BA 920 Flare to X Adaptors, AN 893 O-Ring Port Reducer, AN 912 NPT Reducer, AN 919 External Thread Flared Tube Reducer, AN 932 NPT Pipe Plug, NPT Flare to Hose Adaptors: AN Flare to Hose, NPT to Hose.

AN 775
AN 775
AN 776
AN 776
AN 778
AN 778
AN 783
AN 783
AN 784
AN 784
AN 804
AN 804
AN 806
AN 806
AN 807
AN 807
AN 814
AN 814
AN 815
AN 815
AN 816
AN 816
AN 818
AN 818
AN 819
AN 819
AN 821
AN 821
AN 822
AN 822
AN 823
AN 823
AN 824
AN 824
AN 825
AN 825
AN 826
AN 826
AN 827
AN 827
AN 832
AN 832
AN 833
AN 833
AN 834
AN 834
AN 837
AN 837
AN 838
AN 838
AN 840
AN 840
AN 841
AN 841
AN 842
AN 842
AN 844
AN 844
AN 849
AN 849
AN 867
AN 867
AN 871
AN 871
AN 886
AN 886
AN 887
AN 887
AN 893
AN 893
AN 894
AN 894
AN 910
AN 910
AN 911
AN 911
AN 912
AN 912
AN 913
AN 913
AN 914
AN 914
AN 915
AN 915
AN 916
AN 916
AN 917
AN 917
AN 918
AN 918
AN 919
AN 919
AN 920
AN 920
BA 920
AN 921
AN 921
AN 922
AN 922
AN 924
AN 924
AN 929
AN 929
AN 938
AN 938
AN 950
AN 950
AN 951
AN 951
AN 971
AN 971

Fitting sizes are called out by either a single or double dash number and a material code. In most cases, if the fitting is the same size on all ends, a single dash number appropriate to either the tube flare size or pipe thread is used. If a fitting is used to adapt up or down one or more sizes then usually a double dash number is used, with the flare size listed first, the port side second.
No dash letter = black cad plated steel (straight thread fittings) or black cad plated
brass (pipe fittings)
D = Blue anodized aluminum
J = Stainless Steel
M = Magnesium
Return to Top

STRAIGHT THREAD
Dash No Thread Size
2 5/16-24 NF-3
3 3/8-24 NF-3
4 7/16-20 NF-3
5 ½-20 NF-3
6 9/16-18 NF-3
8 3/4-16 NF-3
10 7/8-174 NF-3
12 1 1/16-12 N-3
16 1 5/16-12 N-3
20 1 5/8-12 N-3
24 1 7/8-12 N-3
28 2 1/4-12 N-3
32 2 ½-12 N-3
40 3-12 N-3
 
PIPE THREAD
Dash Thread
0 1/16-27
1 1/8-27 NPT
2 1/4-18 NPT
3 3/8-18 NPT
4 ½-14 NPT
6 3/4-14 NPT
8 1-11 ½ NPT
10 1 1/4-11 ½
12 1 ½-11 ½
16 2-11 ½ NPT
20 2½-11 ½

AN ADAPTOR FITTINGS
Flare to Flare Fittings

Return to Top

AN 775
AN 775
AN 776
AN 776
AN 778
AN 778
AN 783
AN 783
AN 784
AN 784
AN 804
AN 804
AN 806
AN 806
AN 814
AN 814
AN 815
AN 815
AN 818
AN 818
AN 819
AN 819
AN 821
AN 821
AN 824
AN 824
AN 827
AN 827
AN 832
AN 832
AN 833
AN 833
AN 834
AN 834
AN 837
AN 837
AN 871
AN 871
AN 924
AN 924
AN 929
AN 929
AN 938
AN 938
AN 971
AN 971
STRAIGHT THREAD
Dash No Thread Size
2 5/16-24 NF-3
3 3/8-24 NF-3
4 7/16-20 NF-3
5 ½-20 NF-3
6 9/16-18 NF-3
8 3/4-16 NF-3
10 7/8-14 NF-3
12 1 1/16-12 N-3
16 1 5/16-12 N-3
20 1 5/8-12 N-3
24 1 7/8-12 N-3
28 2 1/4-12 N-3
32 2 ½-12 N-3
40 3-12 N-3
48 3 ½-12 N-3

Flare to flare fitting sizes (i.e. non-reducing adaptors) are designated by a single dash
number corresponding to the equivalent tube or hose size of -2 through -16 (see chart at
right.

AN 775AN 775
BANJO BOLT
Return to Top
AN 775- 4D 12.42
AN 775- 6D 6.85
AN 775- 8D 14.20
AN 775-10D 10.62

AN 776AN 776
BANJO ELBOW, 90º
Return to Top
AN 776- 4D 17.50
AN 776- 6D 18.00
AN 776- 8D 16.50
AN 776-10D 19.80

AN 778 AN 778
BANJO ELBOW, 45º
Return to Top
AN 778- 4D 12.60
AN 778- 6D 18.00
AN 778- 8D 16.90

AN 783AN 783
BULKHEAD T, FEMALE PORT ON LEG

Return to Top
AN 783- 3D 15.20

AN 784AN 784
BULKHEAD T, FEMALE PORT ON RUN
Return to Top
AN 784- 3D 13.20

AN 804AN 804
T, BULKHEAD ON RUN
Return to Top
AN 804- 3D 10.35
AN 804- 4 9.00
AN 804- 4D 6.30
AN 804- 5 15.00
AN 804- 6D 13.24
AN 804- 8D 21.58
AN 804-10D 17.00
AN 804-12D 22.50

AN 806AN 806
FLARE PLUG
Return to Top
AN 806- 2 1.35
AN 806- 2D 2.77
AN 806- 3D 0 to 9 2.00 10 and up 1.88
AN 806- 4D 0 to 9 1.39 10 and up 1.26
AN 806- 5D 0 to 9 1.45 10 and up 1.31
AN 806- 6D 0 to 9 2.21 10 and up 2.00
AN 806- 8D 0 to 9 1.92 10 and up 1.75
AN 806-10D 0 to 9 2.99 10 and up 2.89
AN 806-12 0 to 9 2.70 10 and up 2.43
AN 806-12D 0 to 9 4.50 10 and up 4.05
AN 806-16D 0 to 9 4.59 10 and up 4.12

AN 814AN 814
O-RING PORT PLUG
Return to Top
L indicates drilled for lock wire.
AN 814- 2D 2.70
AN 814- 3D 0 to 19 3.51 20 and up 3.26
AN 814- 3DL 0 to 19 2.50 20 and up 2.25
AN 814- 4 0 to 19 2.25 20 and up 2.03
AN 814- 4D 0 to 19 1.79 20 and up 1.61
AN 814- 4DL 0 to 19 2.67 20 and up 2.25
AN 814- 5D 0 to 19 3.01 20 and up 2.86
AN 814- 5DL 0 to 19 3.22 20 and up 2.78
AN 814- 6 0 to 9 4.50 10 and up 4.25
AN 814- 6D 0 to 9 5.20 10 and up 5.00
AN 814- 6DL 0 to 9 4.75 10 and up 4.35
AN 814- 8 0 to 9 0.98 10 and up 0.92
AN 814- 8D 0 to 9 3.15 10 and up 3.00
AN 814- 8DL 0 to 9 4.88 10 and up 4.48
AN 814-10 0 to 9 1.93 10 and up 1.83
AN 814-10D 0 to 9 5.80 10 and up 5.50
AN 814-12D 0 to 9 6.90 10 and up 6.21
AN 814-20 0 to 9 12.68 10 and up 11.41

AN 815AN 815
UNION
Return to Top
AN 815- 2 0 to 19 8.10 20 and up 7.29
AN 815- 2D 0 to 19 3.25 20 and up 2.93
AN 815- 3 0 to 19 3.06 20 and up 2.75
AN 815- 3D 0 to 19 2.56 20 and up 2.00
AN 815- 3J 0 to 19 6.28 20 and up 5.65
AN 815- 4 0 to 19 3.95 20 and up 3.65
AN 815- 4D 0 to 19 2.10 20 and up 1.75
AN 815- 4J 0 to 19 6.12 20 and up 5.65
AN 815- 5D 0 to 19 2.50 20 and up 2.25
AN 815- 6 0 to 19 4.75 20 and up 4.28
AN 815- 6D 0 to 19 2.88 20 and up 2.76
AN 815- 8 0 to 9 6.75 10 and up 6.08
AN 815- 8D 0 to 9 4.37 10 and up 4.00
AN 815-10D 0 to 9 5.19 10 and up 4.98
AN 815-12D 0 to 9 8.89 10 and up 8.00
AN 815-16D 0 to 9 20.34 10 and up 19.04

AN 818AN 818
B NUT
Return to Top
AN 818- 2 0 to 49 3.15 50 and up 3.15
AN 818- 2D 0 to 49 0.81 50 and up 0.75
AN 818- 3 0 to 49 0.85 50 and up 0.84
AN 818- 3D 0 to 49 0.59 50 and up 0.53
AN 818- 3J 0 to 49 2.58 50 and up 2.00
AN 818- 3P 0 to 49 1.67 50 and up 1.50
AN 818- 4 0 to 49 1.21 50 and up 1.11
AN 818- 4D 0 to 49 0.75 50 and up 0.68
AN 818- 4J 0 to 49 2.75 50 and up 2.35
AN 818- 5 0 to 49 0.95 50 and up 0.86
AN 818- 5D 0 to 49 0.93 50 and up 0.91
AN 818- 6 0 to 49 1.40 50 and up 1.26
AN 818- 6D 0 to 49 1.02 50 and up 0.94
AN 818- 6J 0 to 49 3.62 50 and up 3.52
AN 818- 8 0 to 49 2.45 50 and up 2.20
AN 818- 8D 0 to 49 3.10 50 and up 2.75
AN 818- 8J 0 to 49 4.25 50 and up 3.83
AN 818-10D 0 to 49 1.70 50 and up 1.62
AN 818-12D 0 to 49 3.87 50 and up 3.67

AN 819AN 819
TUBE SLEEVE
Return to Top
AN819- 2 0 to 49 2.02 50 and up 1.92
AN819- 2D 0 to 49 0.79 50 and up 0.70
AN819- 3 0 to 49 1.08 50 and up 0.98
AN819- 3D 0 to 49 0.60 50 and up 0.45
AN819- 3J 0 to 49 1.20 50 and up 1.00
AN819- 4 0 to 49 1.08 50 and up 0.98
AN819- 4D 0 to 49 0.79 50 and up 0.75
AN819- 5 0.50
AN819- 5D 0.40
AN819- 6 0.80
AN819- 6D 0.68
AN819- 8 0.65
AN819- 8D 1.10
AN819-10D 1.44
AN819-12D 2.34

AN 821AN 821
90º UNION
Return to Top
AN 821- 2D 4.50
AN 821- 3D 0 to 9 7.02 10 and up 6.20
AN 821- 4 0 to 9 6.50 10 and up 5.85
AN 821- 4D 0 to 9 6.12 10 and up 5.68
AN 821- 5D 0 to 9 5.10 10 and up 4.75
AN 821- 6 0 to 9 8.10 10 and up 7.80
AN 821- 6D 0 to 9 7.02 10 and up 6.52
AN 821- 8D 0 to 9 9.72 10 and up 9.42
AN 821-10D 0 to 9 13.50 10 and up 12.50
AN 821-12D 0 to 9 23.22 10 and up 22.22

AN 824 AN 824
FLARED "T"
Return to Top
AN 824- 3 8.82
AN 824- 3D 8.08
AN 824- 3J 8.69
AN 824- 4 6.12
AN 824- 4D 5.19
AN 824- 5 18.00
AN 824- 5D 6.53
AN 824- 6 10.00
AN 824- 6D 7.59
AN 824- 8D 14.85
AN 824-10D 10.71

AN 827AN 827
CROSS,AN FLARE
Return to Top
AN 827- 2D 13.50
AN 827- 3D 12.50
AN 827- 4 13.50
AN 827- 4D 4.50
AN 827- 5D 6.50
AN 827- 8D 6.75
AN 827-10D 7.20
AN 827-12D 7.65

AN 832AN 832
BULKHEAD STRAIGHT
Return to Top
AN832- 2 11.90
AN832- 2D 8.50
AN832- 3 4.28
AN832- 3-4 4.50
AN832- 3D 7.50
AN 832- 3-4 4.50
AN 832- 3J 7.90
AN 832- 4 4.72
AN 832- 4D 5.36
AN 832- 5 13.50
AN 832- 5D 8.75
AN 832- 6 13.50
AN 832- 6D 4.90
AN 832- 8 14.35
AN 832- 8D 5.04
AN 832- 8J 20.74
AN 832-10D 11.55
AN 832-12 24.00
AN 832-12D 12.60

AN 833AN 833
90º BULKHEAD
Return to Top
AN 833- 2D 15.40
AN 833- 3 18.90
AN 833- 3D 13.50
AN 833- 3J 16.90
AN 833- 4 7.56
AN 833- 4D 6.25
AN 833- 5 13.10
AN 833- 6 7.35
AN 833- 6D 8.79
AN 833- 8 7.50
AN 833- 8D 10.71
AN 833-10D 13.90
AN 833-12D 18.00

AN 834 AN 834
FLARE, T, BULKHEAD ON LEG
Return to Top
AN 834- 2D 12.00
AN 834- 3 10.26
AN 834- 3D 14.40
AN 834- 3J 16.80
AN 834- 4 10.26
AN 834- 4D 7.56
AN 834- 5D 13.00
AN 834- 6 13.90
AN 834- 6D 11.34
AN 834- 8D 15.12
AN 834-10D 17.82
AN 834-12D 23.40
AN 834-30D 10.26

AN 837
45º BULKHEAD
Return to Top
AN 837- 2 12.25
AN 837- 2D 7.00
AN 837- 3D 7.69
AN 837- 3J 17.69
AN 837- 3P 12.95
AN 837- 4 7.20
AN 837- 4D 6.53
AN 837- 5D 5.55
AN 837- 6D 7.81
AN 837- 8D 10.08
AN 837-10D 12.33
AN 837-12 17.00
AN 837-12D 14.13

AN 871 AN 871
O-RING PORT WELD BOSS
Return to Top
AN 871- 4D 7.91
AN 871- 6D 6.30
AN 871- 8D 8.46
AN 871-10D 12.28
AN 871-12D 10.08
AN 871-16D 12.60
AN 871-20D 10.80

AN 924AN 924
BULKHEAD NUT
Return to Top
AN 924- 2 0 to 24 0.85 25 and up 0.77
AN 924- 2D 0 to 24 0.90 25 and up 0.81
AN 924- 3 0 to 24 2.70 25 and up 2.43
AN 924- 3D 0 to 24 0.55 25 and up 0.50
AN 924- 4 0 to 24 2.05 25 and up 1.95
AN 924- 4D 0 to 24 1.20 25 and up 0.80
AN 924- 5 0 to 24 1.25 25 and up 1.13
AN 924- 5D 0 to 24 1.00 25 and up 0.90
AN 924- 6 0 to 24 1.12 25 and up 1.01
AN 924- 6D 0 to 24 1.40 25 and up 1.20
AN 924- 8 0 to 24 1.45 25 and up 1.31
AN 924- 8D 0 to 24 1.80 25 and up 1.62
AN 924-10D 0 to 24 3.75 25 and up 3.70
AN 924-12D 0 to 24 2.21 25 and up 1.99
AN 924-16 0 to 24 5.95 25 and up 5.36

AN 929AN 929
FLARE CAP
Return to Top
AN 929- 2 2.65
AN 929- 3 0 to 9 1.49 10 and up 1.35
AN 929- 4 0 to 9 1.75 10 and up 1.65
AN 929- 5 0 to 9 1.80 10 and up 1.75
AN 929- 6 0 to 9 2.25 10 and up 2.20
AN 929- 6J 0 to 9 2.55 10 and up 2.30
AN 929- 8 0 to 9 3.46 10 and up 3.11
AN 929-10 0 to 9 4.75 10 and up 4.25
AN 929-12 0 to 9 8.75 10 and up 8.45
AN 929-16 0 to 9 8.50 10 and up 7.65

AN 938AN 938
FEMALE O-RING PORT T
Return to Top
AN 938- 4D 13.30
AN 938- 6D 14.20
AN 938- 8D 15.40
AN 938-10D 15.75

AN 971AN 971
MALE FLARE WELD BOSS
Return to Top
AN 971- 4 3.16
AN 971- 6 3.41
AN 971- 6D 3.25
AN 971- 8 2.70
AN 971- 8D 5.85
AN 971-10 5.97
AN 971-10D 7.65
AN 971-12 5.80
AN 971-12D 10.50
AN 971-16 4.50
AN 971-16D 10.71

FLARE to NPT ADAPTORS
Return to Top

AN 823
AN 823
AN 825
AN 825
AN 826
AN 826

Dash size Flare Size NPT size
2 5/16-24 NF-3 1/8 NPT
3 3/8-24 NF-3
4 7/16-20 NF-3
5 ½-20 NF-3
6 9/16-18 NF-3 1/4 NPT
8 3/4-16 NF-3 3/8 NPT
10 7/8-14 NF-3 ½ NPT
12 1 1/16-12 N-3 3/4 NPT

Common size NPT to flare adaptors use a single dash number correlating to flare size.

AN 823AN 823
AN-NPT 45º ADAPTOR
Return to Top
AN 823- 2D 28.80
AN 823- 3D 9.20
AN 823- 4 7.15
AN 823- 4-4 3.60
AN 823- 4D 4.50
AN 823- 5 11.50
AN 823- 5D 5.50
AN 823- 6 3.25
AN 823- 6-2 3.60
AN 823- 6C 6.74
AN 823- 6D 5.80
AN 823- 8 11.75
AN 823- 8D 8.01
AN 823-10D 14.40
AN 823-12D 21.42

AN 825 AN 825
FLARE "T", NPT ON LEG
Return to Top
AN 825- 3D 9.81
AN 825- 4 10.25
AN 825- 4D 7.87
AN 825- 5D 8.25
AN 825- 6 11.00
AN 825- 6D 10.26
AN 825- 8D 13.86
AN 825-10D 14.40
AN 825-12D 23.40

AN 826AN 826
FLARE, T, NPT ON RUN
Return to Top
AN 826- 2D 9.80
AN 826- 3D 7.56
AN 826- 4 10.50
AN 826- 4D 6.24
AN 826- 4J 2.85
AN 826- 5D 10.95
AN 826- 5J 6.50
AN 826- 6 12.75
AN 826- 6-8 5.40
AN 826- 6D 7.97
AN 826- 8 14.00
AN 826- 8D 10.57
AN 826-10D 17.65
AN 826-12D 25.20

FLARE to NPT ADAPTORS, REDUCERS AND EXPANDERS Return to Top

AN 816AN 816 AN 822AN 822
AN 886AN 886 AN 887AN 887

Straight and 90º flare adaptors are available in step up or step down sizes. They are designated by a double dash number system as shown at right. The first dash number always designates the flare or hose size.

Dash # Flare Size NPT Size
2 -2 (5/16-24) 1/8 NPT
3 -3 (3/8-26) 1/8 NPT
3-4 1/4 NPT
3-6 3/8 NPT
4 -4 (7-16-20) 1/8 NPT
4-4 1/4 NPT
4-6 3/8 NPT
5 -5 (1/2-20) 1/8 NPT
5-4 1/4 NPT
6 -6 (9/16-18) 1/4 NPT
6-2 1/8 NPT
6-6 3/8 NPT
6-8 ½ NPT
7 -8 (3/4-16) 1/4 NPT
8 -8 (3/4-16) 3/8 NPT
8-8 ½ NPT
10 -10 (7/8-14) ½ NPT
10-6 3/8 NPT
10-12 3/4 NPT

AN 816AN 816
FLARE TO STRAIGHT ADAPTOR
Return to Top
AN 816- 2 4.00
AN 816- 2D 1.75
AN 816- 3 2.58
AN 816- 3-4D 9.21
AN 816- 3-6D 8.80
AN 816- 3D 2.52
AN 816- 3J 5.62
AN 816- 4 1.95
AN 816- 4-4 2.19
AN 816- 4-4D 2.45
AN 816- 4-6 3.15
AN 816- 4-6B 4.48
AN 816- 4-6D 8.80
AN 816- 4D 2.38
AN 816- 4J 5.67
AN 816- 5 4.46
AN 816- 5-4 5.10
AN 816- 5D 2.35
AN 816- 6 2.74
AN 816- 6-2 3.20
AN 816- 6-2D 3.77
AN 816- 6-6 3.29
AN 816- 6-6D 3.50
AN 816- 6-6J 10.00
AN 816- 6-8D 5.12
AN 816- 6B 2.70
AN 816- 6D 3.55
AN 816- 6J 6.30
AN 816- 7 1.17
AN 816- 7D 3.10
AN 816- 7J 10.15
AN 816- 8 3.28
AN 816- 8-8 3.59
AN 816- 8-8D 5.97
AN 816- 8-8J 8.10
AN 816- 8D 4.14
AN 816- 8J 9.00
AN 816-10 3.60
AN 816-10-8 7.20
AN 816-10-8D 5.80
AN 816-1012D 5.80
AN 816-10D 5.85
AN 816-10J 12.60
AN 816-12 3.15
AN 816-12-8 8.77
AN 816-12-8D 8.05
AN 816-12D 9.61
AN 816-12J 13.50

AN 822AN 822
NPT 90º ADAPT
Return to Top
AN822- 2D 16.20
AN822- 3 6.12
AN822- 3D 7.65
AN822- 3J 14.20
AN822- 4 6.12
AN822- 4-4 2.48
AN822- 4-4D 5.85
AN822- 4D 6.29
AN822- 5-4 9.10
AN822- 5-4D 7.00
AN822- 5D 5.98
AN822- 6 13.90
AN822- 6-2 5.54
AN822- 6-2D 7.65
AN822- 6-6 3.15
AN822- 6-6D 11.52
AN822- 6-8 3.48
AN822- 6D 5.78
AN822- 6J 13.68
AN822- 7 3.15
AN822- 7D 14.80
AN822- 8 3.15
AN822- 8-8 5.40
AN822- 8-8D 13.58
AN822- 8D 7.92
AN822- 8J 6.00
AN822-10 4.05
AN822-10-8D 18.90
AN822-10D 11.68
AN822-10J 13.50
AN822-12 4.50
AN822-12-8 27.00
AN822-12-8D 33.00
AN822-12D 17.82
AN822-15D 28.80
AN822-17 4.50

AN 886AN 886
90º FNPT TO FLARE ADAPTOR
Return to Top
AN 886- 3 4.21
AN 886- 4 3.89

AN 887AN 887
FNPT TO FLARE ADAPTOR
Return to Top
AN887- 3 5.97
AN887- 3D 8.97
AN887- 4 2.69
AN887- 4D 8.42
AN887- 5D 7.20
AN887- 6 9.00
AN887- 6-6 3.49
AN887-12D 22.50

NPT
Return to Top

AN 867
AN 867
AN 910
AN 910
AN 911
AN911
AN 913
AN 913
AN 914
AN 914
AN 915
AN 915
AN 916
AN 916
AN 917
AN 917
AN 918
AN 918
PIPE THREAD
Dash No Thread Size
0 1/16-27 NPT
1 1/8-27 NPT
2 1/4-18 NPT
3 3/8-18 NPT
4 ½-14 NPT
6 3/4-14 NPT
8 1-11 ½ NPT
10 1 1/4-11 ½
12 1 ½-11 ½
16 2-11 ½ NPT
20 2½-11 ½


AN 867 AN 867
NPT WELD BOSS
Return to Top
AN 867- 1D 3.51
AN 867- 2D 6.30
AN 867- 3D 4.10
AN 867- 4D 5.24
AN 867- 6D 7.56
AN 867- 8D 13.98

AN 910AN 910
NPT COUPLING
Return to Top
AN 910- 1D 2.69
AN 910- 2D 3.78
AN 910- 3D 5.35
AN 910- 4D 8.55
AN 910- 6D 11.07

AN 911 AN 911
NPT NIPPLE
Return to Top
AN 911- 1 1.35
AN 911- 1D 2.75
AN 911- 2 2.50
AN 911- 2D 4.98
AN 911- 3 2.50
AN 911- 3D 5.04
AN 911- 4 4.25
AN 911- 4D 5.31
AN 911- 6D 10.80

AN 913AN 913
PIPE PLUG, SQUARE HEAD
Return to Top
AN 913- 1 1.80
AN 913- 1D 1.89
AN 913- 2 2.75
AN 913- 2D 3.97
AN 913- 3 1.80
AN 913- 3D 3.59
AN 913- 4 4.45
AN 913- 4D 4.50
AN 913- 6D 5.80
AN 913- 8D 6.50

AN 914AN 914
NPT 90º STEEL
Return to Top
AN 914- 1 12.31
AN 914- 1-2J 8.84
AN 914- 1D 7.75
AN 914- 2D 7.20
AN 914- 3D 15.21
AN 914- 4D 18.75
AN 914- 8 10.00

AN 915AN 915
1/4 NPT 45º ST ELBOW
Return to Top
AN 915- 1 7.75
AN 915- 1D 9.00
AN 915- 2 10.50
AN 915- 2D 9.97
AN 915- 3D 17.10
AN 915- 4D 19.89

AN 916AN 916
NPT 90º FEMALE ELBOW
Return to Top
AN 916- 1 7.26
AN 916- 1D 11.25
AN 916- 2D 7.20
AN 916- 3D 11.34
AN 916- 4D 28.46

AN 917AN 917
NPT "T"
Return to Top
AN 917- 1 10.65
AN 917- 1D 11.25
AN 917- 2 7.75
AN 917- 2D 15.12
AN 917- 3D 17.10
AN 917- 4D 17.82
AN 917- 6D 24.00

AN 918AN 918
CROSS,INTERNAL THREAD
Return to Top
AN 918- 1D 9.95
AN 918- 1J 16.00
AN 918- 3D 14.00

AN FLARE PORT REDUCERS/EXPANDERS
Return to Top

AN 894
AN 894
AN 920
AN 920
AN 950
AN 950
AN 951
AN 951

AN flare port reducers and expanders relevant sizes are designated by a double dash number. The first number is always the male flare of the attaching hose or tube, the second number is flare or port being expanded or reduced.

AN 894 AN 894
PORT EXPANDER
Return to Top
AN894D 4- 3 8.80
AN894D 5- 4 12.56
AN894D 6- 4 6.00
AN894D10- 4 11.77
AN894D10- 8 11.00
AN894D12- 6 10.35
AN894D12- 8 22.00
AN894D12-10 19.80
AN894D16- 6 21.00

AN 921AN 921
90º FLARE TO PORT ADAPTOR
Return to Top
AN 921- 6 7.83
AN 921- 8 12.60
AN 921-10 17.60

AN 922AN 922
45º FLARE TO PORT ADAPTOR
Return to Top
AN 922- 6 7.83
AN 922-10 19.80

AN 950AN 950
FLARE REDUCER

Return to Top
AN 950- 3- 4 18.40
AN 950- 4- 6 4.50
AN 950- 4-10 5.85
AN 950- 6- 8 6.88
AN 950- 6-10 6.30
AN 950- 8-10 7.15
AN 950- 8-12 8.10
AN 950-10-12 11.52
AN 950-12-16 25.40
AN 950-92 17.07
AN 950-96 17.64

AN 951AN 951
FLARE EXPANDER
Return to Top
AN 951- 4- 3 12.50
AN 951- 6- 4 5.22
AN 951- 8- 6 7.87
AN 951-10- 8 8.10
AN 951-12-10 8.95


AN 920AN 920
FLARE TO O-RING PORT ADAPTOR
Return to Top

Dash # T1 T2 Crush Washer O Ring
-6 AN 6 (9/16-18) 9/16-18 X X
-6-4 AN 6 (9/16-18) 7/16-20 X X
-6-5 AN 6 (9/16-18) 1/2-20 X X
-8 AN 8 (3/4-16) 3/4-16 X X
-8-10 AN 8 (3/4-16) 15/16-14 X X
-10 AN 10 (15/16-14) 15/16-14 X X
-10-8 AN 10 (15/16-14) 3/4-16 X X
-10-12 AN 10 (15/16-14) 1 1/16-12 X X
-12 AN 12 (1 1/16-12) 1 1/16-12 X X
-12-10 AN 12 (1 1/16-12) 15/16-14 X X

AN 920- 6 5.85
AN 920- 6- 4 8.01
AN 920- 6- 5 7.60
AN 920- 8 10.90
AN 920- 8-10 16.74
AN 920-10 20.97
AN 920-10- 8 11.70
AN 920-10-12 16.24
AN 920-12 14.04
AN 920-12-10 16.20

AN920AN 920
FLAIR TO SPECIAL PORT ADAPTOR
Return to Top

Dash # T1 T2 Crush Washer O Ring Inv. Flare Application
-66 AN 6 (9/16-18) 9/16-24 X     Single Feed Holley
-67 AN 6 (9/16-18) 5/8-18 SAE X   X Fuel Pumps, Power Steering
-68 AN 6 (9/16-18) 5/8-20 X     Carter AFB
-69 AN 6 (9/16-18) 7/8-20 X     Duel Feed Holley
-70 AN 6 (9/16-18) 1-20 X     QuadraJet
-71 AN 6 (9/16-18) 11/16-16 SAE X   X Power Steering
-87 AN 8 (3/4-16) 5/8-18 SAE X   X Power Steering / Fuel Punp
-89 AN 8 (3/4-16) 7/8-20 X     Dual Feed Holley

AN 920-66 4.88
AN 920-67 4.98
AN 920-68 4.41
AN 920-69 6.12
AN 920-70 6.30
AN 920-71 5.29
AN 920-87 8.56
AN 920-89 7.75

AN920AN 920
FLARE TO METRIC PORT ADAPTOR
Return to Top

Dash # T1 T2 Crush Washer O Ring Application
-61 AN 6 (9/16-18) M12-1.0 X   Misc German Fuel Systems
-63 AN 6 (9/16-18) M12-1.25 X   Dellorto
-64 AN 6 (9/16-18) M12-1.5 X   Webber
-6M22 AN 6 (9/16-18) M22-1.5   X Oil Cooler
-8M22 AN 8 (3/4-16) M22-1.5   X Oil Cooler
-10M22 AN 10 (15/16-14) M22-1.5   X Oil Cooler
-12M22 AN 12 (1 1/16-12) M22-1.5   X Oil Cooler
-12M30 AN 12 (1 1/16-12) M30-1.5 X   Porsche Oil Adaptor

AN 920-61 8.50
AN 920-63 6.26
AN 920-64 5.35
AN 920- 6M22 6.54
AN 920- 8M22 6.54
AN 920-10M22 6.54
AN 920-12M22 6.54
AN 920-12M30 19.98

BA 920BA 920
AN FLARE TO BSP PORT ADAPTOR
D after the dash number indicates the material is aluminum.
Return to Top

Dash # T1 T2 Crush Washer Inv. Flare
-3 AN 3 (3/8-24) 1/8 BSP X X
-4 AN 4(7/16-20) 1/8 BSP X X
-4-4 AN 4(7/16-20) 1/4 BSP X X
-6 AN 6 (9/16-18) 1/4 BSP X X
-6-6 AN 6 (9/16-18) 3/8 BSP X X
-8-4 AN 8 (3/4-16) 1/4 BSP X X
-8 AN 8 (3/4-16) 3/8 BSP X X
-8-8 AN 8 (3/4-16) 1/2 BSP X X
-10 AN 10 (7/8-14) 1/2 BSP X X
-10-10 AN 10 (7/8-14) 5/8 BSP X X
-12- 8 AN 12 (1 1/16-12) 1/2 BSP X X
-12 AN 12 (1 1/16-12) 3/4 BSP X X
-12-10 AN 12 (1 1/16-12) 5/8 BSP X X
-16- 8 AN 16 (1 5/16-12) 1/2 BSP X X

BA 920- 3 10.08
BA 920- 4 0 to 9 8.87 10 and up 8.00
BA 920- 4- 4 6.12
BA 920- 4D 8.80
BA 920- 6-6D 13.90
BA 920- 6D 12.87
BA 920- 8-4D 9.90
BA 920- 8-8 0 to 9 8.10 10 and up 7.80
BA 920- 8-8D 10.65
BA 920- 8D 14.85
BA 920-10 0 to 9 8.97 10 and up 8.58
BA 920-10-10 0 to 9 18.60 10 and up 17.00
BA 920-1010D 17.82
BA 920-10D 0 to 9 19.60 10 and up 17.00
BA 920-12-8D 0 to 9 14.40 10 and up 13.90
BA 920-1210D 17.91
BA 920-12D 16.90
BA 920-16-8D 26.82

AN 893AN 893
O-RING PORT REDUCER
Return to Top

Dash No. Internally Threaded end Externally Threaded end
1 -4
7/16-20
-5 1/2-20
2 -6 9/16-18
3 -8 3/4-16
31 -10 7/8-14
5 -16 1 5/16-12
8 -5
1/2-20
-8 3/4-16
12 -6
9/16-18
-8 3/4-16
121 -10 7/8-14
13 -12 1-1/16-12
14 -16 1 5/16-12
151 -8
3/4-16
-10 7/8-14
16 12 1 1/16-12
19 -10
7/8-14
-12 1 1/16-12
22 -12
11/16-12
-16 1 5/16-12

AN 893- 1D 7.20 AN 893- 2D 8.82
AN 893- 31D 12.42
AN 893- 3D 8.67
AN 893- 5D 19.80
AN 893- 8D 8.40
AN 893-121D 12.60
AN 893-13D 15.30
AN 893-14D 22.50
AN 893-151D 12.42
AN 893-16D 22.50
AN 893-19D 12.60
AN 893-22D 22.50

AN 912
NPT REDUCERAN 912 Chart
Return to Top
AN 912- 1 1.98
AN 912- 1D 3.98
AN 912- 2 2.65
AN 912- 2D 3.24
AN 912- 3 2.95
AN 912- 3D 3.10
AN 912- 4 3.75
AN 912- 4D 4.25
AN 912- 5 4.65
AN 912- 5D 4.15
AN 912- 6 4.95
AN 912- 6D 4.25
AN 912- 7 5.70
AN 912- 7D 7.81
AN 912- 8 6.10
AN 912- 8D 7.65
AN 912- 9D 7.25
AN 912-10D 10.50
AN 912-11D 11.05
AN 912-12D 11.85
AN 912-13D 11.00

AN 919AN 919
EXTERNAL THREAD FLARED TUBE JUMP UNION
MS24399D3Return to Top

Dash Number Large End Small End
0 -3 -2
1 -4
2 -3
3 -5 -4
4 -6 -2
5 -3
6 -4
7 -5
8 -8 -2
9 -3
10 -4
11 -5
12 -6
13 -10 -4
14 -6
15 -8
16 -12 -4
17 -5
18 -6
19 -8
20 -10
21 -16 -4
22 -10
23 -12

D after dash indicates anodized aluminum.
AN 919- 0D 0 to 19 5.40 20 and up 5.20
AN 919- 1 0 to 19 3.85 20 and up 3.47
AN 919- 1D 0 to 19 2.88 20 and up 2.59
AN 919- 2 0 to 19 4.10 20 and up 3.70
AN 919- 2D 0 to 19 3.55 20 and up 3.50
AN 919- 3D 0 to 19 7.78 20 and up 7.00
AN 919- 4 0 to 19 7.10 20 and up 6.39
AN 919- 4D 0 to 19 6.10 20 and up 5.49
AN 919- 5D 0 to 19 6.00 20 and up 5.85
AN 919- 6 0 to 19 6.50 20 and up 5.85
AN 919- 6D 0 to 19 3.83 20 and up 3.45
AN 919- 7D 0 to 19 5.40 20 and up 5.00
AN 919- 8 0 to 19 7.50 20 and up 6.75
AN 919- 8D 0 to 19 6.50 20 and up 5.85
AN 919- 9D 0 to 19 5.40 20 and up 5.00
AN 919-10D 0 to 19 8.97 20 and up 8.00
AN 919-11D 0 to 19 5.40 20 and up 4.86
AN 919-12D 0 to 19 5.85 20 and up 5.50
AN 919-13D 0 to 19 7.20 20 and up 6.48
AN 919-14D 0 to 19 8.10 20 and up 7.50
AN 919-15D 0 to 19 7.71 20 and up 7.40
AN 919-16 0 to 19 14.00 20 and up 12.60
AN 919-16D 0 to 19 10.80 20 and up 9.72
AN 919-17D 0 to 19 10.80 20 and up 9.72
AN 919-18D 0 to 19 10.80 20 and up 9.72
AN 919-19D 0 to 19 13.50 20 and up 12.50
AN 919-20D 0 to 19 11.58 20 and up 11.38
AN 919-22D 0 to 19 22.50 20 and up 20.25
AN919-26 8.50

AN 932AN 932
NPT PIPE PLUG
Return to Top

PIPE PLUG
Dash # Thread
1 1/16-27
2 1/8-27 NPT
3 1/4-18 NPT
4 3/8-18 NPT
5 ½-14 NPT
6 3/4-14 NPT
7 1-11 ½ NPT

For reasons only known to the government who made this system up, the AN 932 pipe plug is one dash number ahead of all the other NPT fitting dash numbers. Also, in this unique case, the material designator comes after the basic part number but before the dash number. Material Designation:
- = Black Cad plated steel
D = Blue anodized aluminum
C = Copper alloy (brass) M = Magnesium

AN 932- 2 0 to 9 0.85 10 and up 0.80
AN 932- 3 0 to 9 1.29 10 and up 1.15
AN 932- 4 0 to 9 2.02 10 and up 1.92
AN 932- 5 0 to 9 2.25 10 and up 2.15
AN 932- 7 0 to 9 3.55 10 and up 3.20
AN 932C 2 0 to 9 0.72 10 and up 0.65
AN 932C 3 0 to 9 1.30 10 and up 1.25
AN 932C 4 0 to 9 1.71 10 and up 1.54
AN 932C 5 0 to 9 1.80 10 and up 1.62
AN 932C 6 0 to 9 1.98 10 and up 1.78
AN 932C 7 0 to 9 3.60 10 and up 3.24
AN 932D 1 0 to 9 1.80 10 and up 1.70
AN 932D 2 0 to 9 1.11 10 and up 1.01
AN 932D 3 0 to 9 2.49 10 and up 2.25
AN 932D 4 0 to 9 3.75 10 and up 3.50
AN 932D 5 0 to 9 2.52 10 and up 2.32
AN 932D 6 0 to 9 4.72 10 and up 4.52
AN 932D 7 0 to 9 8.10 10 and up 7.29
AN 932M 5 5.75
AN 932M 6 6.98

NPT FLARE TO HOSE ADAPTORS

AN FLARE TO HOSE
Return to Top

STRAIGHT THREAD
Dash No Thread Size Hose I.D.
4 7/16-20 NF-3 1/4
6 9/16-18 NF-3 3/8
8 3/4-16 NF-3 1/2
10 7/8-174 NF-3 5/8
12 1 1/16-12 N-3 3/4

AN 807AN 807
BULKHEAD FLARE TO HOSE
Return to Top
AN 807- 4D 5.95
AN 807- 6D 8.10
AN 807- 8D 11.50

AN 838AN 838
90º BULKHEAD, FLARE TO HOSE
Return to Top
AN 838- 4D 10.75

AN 841AN 841
FLARE, HOSE BIB
Return to Top
AN 841- 4D 9.37
AN 841- 6D 9.37

AN 849AN 849
BULKHEAD, HOSE TO HOSE
Return to Top
AN 849- 6D 8.25

NPT TO HOSE
Return to Top

PIPE THREAD
Dash # Thread Size Hose I.D.
4 1/8 NPT 1/4
6 1/4 NPT 3/8
8 3/8 NPT 1/2
10 ½ NPT 5/8
12 3/4 NPT 3/4
16 3/4 NPT 1
19 3/4 NPT 1 1/4

AN 840 AN 840
HOSE BIB X NPT
Return to TopAN840- 4 9.95
AN840- 4D 3.78
AN840- 6D 4.87
AN840- 8D 5.92
AN840- 9 2.16
AN840-10D 6.97
AN840-12D 12.00
AN840-19D 17.95
AN 842 AN 842
HOSE BIB x NPT 90º
Return to Top
AN 842- 4D 13.50
AN 842- 6D 9.97
AN 842- 8D 13.20
AN 842- 9 3.55
AN 842-10D 15.12
AN 842-12D 29.98

AN 844AN 844
HOSE BIB x NPT, 45º
Return to Top
AN 844- 4D 9.98
AN 844- 6 16.95
AN 844- 6D 15.87
AN 844- 8D 19.90
AN 844-10D 15.12
AN 844-12D 22.90
AN 844-16D 26.70